玻璃反應釜主要是利用其雙層的玻璃特點，我們可以在中間的夾層放置反應物料（有點叫反應溶媒），通過在常壓或者負壓的情況下進行攪拌反應，玻璃反應釜通過雙層反應釜夾層，注入恒溫的（高溫或低溫）熱溶液或冷卻液，對反應釜內(nèi)的物料進行恒溫加熱或制冷，并且可以提供攪拌。

Glass reaction kettle is mainly the use of the doublecharacteristics of glass, we can reaction material is placed in the middle ofthe sandwich (is the reaction solvent), by mixing reaction under atmosphericpressure or negative pressure, glass reaction kettle through double reactordissection, injection temperature (hot or cold) solution heat or coolingliquid, the materials in the reaction kettle were constant temperature heatingor cooling, and can provide agitation.

玻璃反應釜怎樣才能到恒溫？是個頭痛的事情，只是大家有幾個重要的細節(jié)沒有注意，如果把這幾點做好玻璃反應釜恒溫是沒有問題的。本文由興創(chuàng)工程師給大家講下玻璃反應釜溫度恒溫的方法，僅供參考。

 Howcan the glass reaction kettle be accurate to the constant temperature? Is aheadache thing, but we have a few important details of the attention, if you doa good job of the temperature of the glass reactor is no problem. In this paper,Xing Chong engineer to l us the temperature of the glass reaction kettleprecise temperature method, for reference only.

一、玻璃反應釜的保溫層做的是否合理。

One, glass reaction kettle is reasonable todo the insulation layer.

二、反應釜的接頭是否位置的合理分配還有銜接合理。

Two, the reaction kettle connector isreasonable distribution of the location and reasonable.

三、反應釜配備的溫度源配置是否合理，溫度源的功率是否合理，選配的結構、還有廠家的質量是否溫度。

Three, the reactor（www.fanyingfuw。。ｃｏｍ） is equipped with thetemperature source configuration is reasonable, the power of the temperature isreasonable, the structure, as well as the quality of the manufacturer istemperature.

四、溫度源的重要性，在選配的時候必須注重廠家質量的把關。

Four, theimportance of the temperature source, in the selection of manufacturers mustpay attention to the quality of the check.